- Home
- ยป
- Our Product Range
- »
- Test Kit and Set
Test Kit and Set
Transformer Oil Insulation Test Set
Material | Mild Steel |
Usage/Application | Oil Test |
Brand | AS Electrotech |
Display | Digital |
Capacity | 1200 VA |
Input Voltage | 230 Volts + 10% 50 Hz. |
Surface Finishing | Color Coated |
Output Voltage | 120 KV |
Phase | Single Phase |
We are one of the trusted companies of Transformer Oil Insulation Test Set. Our products are enormously admired in the market owing to their top features.
Transformer Oil Acidity Test Kit
Usage/Application | Test Acidity of Transformer Oil |
Brand | Monarch Control |
Capacity | 50 Tests Per Kit |
Model Number | AC-50 |
Humidity | 85% RH |
Test Range | 0.002 -1mg KOH / G |
Relay Test Set
Material | MS |
Brand | AS Electrotech |
Current Output | 100A |
Relay Voltage | 240 V, 50 Hz |
Power Source | Electric |
Surface Finish | Color Coated |
Primary Current Injection Test Set
Usage/Application | Industrial |
Load Capacity | 200-5000 Amp |
Material | Mild Steel |
Frequency | 50/60 Hz |
Surface Treatment | Color Coated |
Input Voltage | 230 V +- 10%; 50-60 Hz |
Display Type | Digital |
As a customer-focused organization, we are providing a wide array Primary Current Injection Test Set. In addition to this, we are providing these products at very leading prices.
Mild Steel Oil Insulation Test Set
Product Brochure
Material | Mild Steel |
Usage/Application | Oil Test |
Brand | AS Electrotech |
Input Voltage | 230 Volts + 10% 50 Hz. |
Surface Finishing | Color Coated |
Resolution | 0.1 KV |
Output Voltage | 50-60 KV |
Phase | Single Phase |
Our presented series of Mild Steel Oil Insulation Test Set is enormously demanded in the market for their long-lasting nature and superior finish.
General Arrangement:
The set will be consisting of the following: H.T. Transformer, Control Circuit, Test Cell with electrode, guage and supply input cable of at least 2 metres length with 3 pin plug. The Set is in single unit. Instruction manual with circuit diagram will be supplied along with the Set.
H.V. Transformer:
H.V. Transformer used in the Test Set is double wound Resin-Cast High Voltage Transformer. The H.V. Winding of the high voltage testing transformer is of graded insulation with center point of H.V. winding grounded. This testing transformer is specially designed to withstand frequent spark over or momentary short circuit conditions under which such testing transformers are supposed to operate.
Protection:
Beside main switch and fuse in the input side. one “ON” and one “OFF” push button switch along withC.T. and contactor provides a snap acting automatic tripping of H.V. circuit in case of overload or breakdown of oil sample under test.Over voltage Indication: Over Voltage indication lamp and alarm is provided for motor operated sets.
Over voltage Protection:
For motorised sets, over voltage protection is provided.
Metering:
96 sq. mm. AC moving iron type voltmeter connected to the L.T. side and scaled in KV.
Mode of Operation:
Sets will be available either in manual or in motor operated mode. In motor operated sets, the regulators are adjusted at approximately 2 KV/sec. rate of rise of voltage.
Test Cell:
The Test Vessel (Oil Cell) fitted with two brass spheres of diameter between 12.5 to 13 mm, placed at a distance of 4 mm or 2.5 mm. The test vessel made from non-absorbent insulating material. Gap of the spheres can be adjusting one sphere while the other being fixed. Dimensions are generally as per IS 6792:1992. A gauge is provided along with the cell to adjust the gap.
Test Set Housing:
The set is in single unit. All the components are housed within a nicely painted M.S. cabinet provided with wheels, M.S. buffer and handles fore easy movement. A transparent cutout with suitable interlockingdevices provided for covering the H.T. side. The Set will not get energised unless this H.T. end is covered. The oil cell is to be placed between the H.V. terminals.
Features that can be provided at extra cost:
# tripping Set other than standard setting.
# Digital Metering
Safely Measures:
Zero start interlocking is provided to ensure that the H.V. circuit cannot be energised unless the regulating transformer is at Zero position or brought back to zero position after each test, A transparent cutout with suitable interlocking device is provided for covering the H.T. side. The Set will not get energised unless this H.T. end is covered.
Memory Switch:
Memory device along with push button switch enables the test set meter to show the breakdown voltage by pressing the memory switch even after the high voltage circuit is tripped OFF
Secondary Injection Relay Test Kit
Material | Mild Steel |
Brand | AS Electrotech |
Relay Current | 500 Amp |
Weight | 16 Kg |
Power Source | Electric |
Surface Finish | Color Coated |
Rated input power | AC 220V+-10% 1000VA 50Hz |
Phase | 3 Phase |
We are engaged in offering Secondary Injection Relay Test Kit, which is extremely praised in the market. Owing to high demand, professionals make these products in varied patterns.
120 KV Motorized Transformer Oil Insulation Test Set
Material | MS |
Usage/Application | Oil Test |
Accuracy | 99% |
Brand | AS Electrotech |
Capacity | 120 KV |
Display | Digital |
Frequency | 50-60 hz |
Input Voltage | 220 V |
Surface Finishing | Color Coated |
Voltage tester
Model Name/Number | ASET 550 |
Usage/Application | Industrial |
Brand | AS ELECTROTECH |
Voltage | 5000 Volts.AC |
Power Supply | 230 V.1ph.50hz.ac |
Dimension | 250mmx180mmx130 mm |
Display Type | Analogue/ Digital |
Phase | 1 phase |
Testing machines
Minimum Order Quantity: 1 piece
Material | Mild Steel |
Usage/Application | Industrial |
Color | It is of powdercoating coated by colour |
Packaging Type | Wooden Box |
Display Type | Digital |
Load Capacity | 150 KVA |
The control and loading transformer unit is made by nicely painted sturdy ms sheet.
Three phase svuriel cag and sleepring motor coupled with eachother are mounted on mschannel frame
Control circuit,input cable, instruction manual wih circuit diagram,test reports provided with the equipment.
Provision for portable motor placing